PTP-ZK Series Fully Automatic Touch Pannel Screen Printing Machine
Suitable for printing medium and lardge size rigid sheet like Touch Pannel, ITO, electronic glass and so on.
1. Automatic loading→Positioning→Printing→Unloading, it can be connected with the tunnel stove to become automatic production lines.
2. Printing and Snap-off are all controled by servo motor, so they are synchronize through digitals set, then effectively avoid sticking.
3. The servo motor drives the printed substrate move fast and smoothly, guarantees the position accurate and precise.
4. The adjustment of print pressure and screen is convenience and accuracy. Squeegee's angle can be adjusted freely and obliquely.
5. The four-post vertical lifing structure of the printing frame to ensure equalized printing pressure.
6. The key components adopt worldwide bands such as "ABB" ,"REXROTH (Germany)" "MITSUBISHI(Japan)" "SMC (Japan)", "PANASONIC(Japan)", "NORGREN (UK)".
Detailed
TECHNICAL SPECIFICATION
|
Max.Printing Size |
600×600mm |
|
Min.Printing Size |
300×300mm |
|
Max.Frame Size |
1200×1000mm |
|
Table Size |
900×700mm |
|
Mechanical Capacity |
600P/H |
|
Screen micro adjustment |
±10mm |
|
Squeegee Inclination Angle |
0~25° |
|
Swing Angle |
±-8° |
|
Thickness of Printout |
0.5~5mm |
|
Mechanial Repeatabilily |
±0.01mm |
|
Air Pressure |
5~6kgs/cm2 |
|
Air Consumption |
6.5L/cycle |
|
Power Supply |
380V/50Hz(Three Phass& Four Wires) |
|
Total Power |
4.8KW |
Accpts special specification orders
